Connecting directly to a telephone wall jack

Connect the printer directly to a telephone wall jack to make copies or to send and receive faxes without using a computer.

1Make sure you have a telephone cord and a telephone wall jack.

2Connect one end of the telephone cord into the FAX port of the printer.

3Connect the other end of the telephone cord into an active telephone wall jack.

Connecting to a telephone

Connect a telephone to the printer to use the fax line as a normal telephone line. Then set up the printer wherever your telephone is located to make copies or to send and receive faxes without using a computer.

Note: Setup steps may vary depending on your country or region.

1Make sure you have the following:

A telephone

Two telephone cords

A telephone wall jack

Learning about the printer

23

Page 23
Image 23
Lexmark 560n manual Connecting directly to a telephone wall jack, Connecting to a telephone