Setting the copy margins

Note: The ADF cannot be used for this feature.

1From the printer control panel, press System.

2Press or repeatedly until Default Settings appears, and then press OK.

3Press or repeatedly until Copy Defaults appears, and then press OK.

4Press or repeatedly until Margin Width appears, and then press OK.

5Press or repeatedly to select the margin you would like to change, and then press OK.

6Press or repeatedly to adjust the margin, and then press OK.

7Repeat the steps for other margins, and then press repeatedly until Select Function appears.

8Load an original document facedown on the scanner glass.

9From the printer control panel, press Copy.

10Use the keypad to enter the number of copies.

11To change the color mode, press Color Mode until the light comes on next to the selection you want. Choose between B&W (black and white) and Color.

12Press or repeatedly until Margin appears, and then press OK.

13Press or repeatedly until On appears, and then press OK.

14Press Start to begin copying.

Canceling a copy job

To cancel a print job, press Stop at any time.

Note: If the copy job continues to print, part of the job may have already been transmitted to the printer buffer before the stop command was sent. Canceling appears on the display, and the remaining buffered pages are printed before the job is canceled.

Copying

69

Page 69
Image 69
Lexmark 560n manual Canceling a copy job, Setting the copy margins