AN ERROR MAY HAVE OCCURRED IN THE PROGRAM

Turn off and then restart the computer.

Scanning takes too long or freezes the computer

These are possible solutions. Try one or more of the following:

DO YOU HAVE ANY OTHER SOFTWARE PROGRAMS RUNNING?

Close all programs not being used.

THE SCAN RESOLUTION MAY BE SET TOO HIGH

Select a lower scan resolution.

Poor scanned image quality

These are possible solutions. Try one or more of the following:

ARE THERE ANY ERROR MESSAGES ON THE DISPLAY?

Clear any error messages.

IS THE SCANNER GLASS DIRTY?

Clean the scanner glass with a clean, lint-free cloth dampened with water.

ADJUST THE SCAN RESOLUTION

Increase the resolution of the scan for a higher quality output:

1From the printer control panel, press System.

2Press or repeatedly until Default Settings appears, and then press OK.

3Press or repeatedly until Scan Defaults appears, and then press OK.

4Press or repeatedly until Resolution appears, and then press OK.

5Press or repeatedly to select a higher resolution, and then press OK.

6Press repeatedly until Select Function appears.

CHECK THE QUALITY OF THE ORIGINAL DOCUMENT

Make sure the quality of the original document is satisfactory.

CHECK THE DOCUMENT PLACEMENT

Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner.

Troubleshooting

178

Page 178
Image 178
Lexmark 560n manual Scanning takes too long or freezes the computer, Poor scanned image quality, 178