Menu item

DRPD Pattern

Pattern1

Pattern2

Pattern3

Pattern4

Pattern5

Forward Settings

Trans. at Error

Trans. Always

Not Trans.

Fwd. Settings Num

<input forward settings number>

Fwd. Set Print

Off

On

Prefix Dial

Off

On

Prefix Dial Num

<input prefix dial number>

Discard Size

Off

On

Auto Reduction

Color Fax

Off

On

Description

Specifies a distinctive ring pattern for use with DRPD service. DRPD Patterns are specified by your telephone company.

Note: Pattern4 is the factory default setting.

Specifies when you want the printer to forward all of the outgoing faxes to a specified destination

Notes:

Trans. at Error—Outgoing faxes are forwarded only when an error occurs.

Trans. Always—Outgoing faxes are always forwarded.

Not Trans.—Outgoing faxes are not forwarded.

Not Trans. is the factory default setting.

Specifies the number that outgoing faxes are forwarded to

Specifies whether the outgoing faxes are printed when they are forwarded. When Fwd. Set Print is set to On, all of the forwarded faxes are printed.

Note: Off is the factory default setting.

Specifies whether to add the prefix number when you send a fax

Note: Off is the factory default setting.

Specifies the prefix dial number (up to five digits). This number dials before any auto dial number is started. It is useful for accessing the PBX exchange.

Specifies if the printer should discard any excess data at the bottom of the page

Notes:

On—Discards any excess data at the bottom of the page.

Off—Prints any excess data at the bottom of the page without discarding it.

Auto Reduction—Reduces the document to fit onto the paper.

Off is the factory default setting.

When Color Fax is set to On, both black-and-white and color fax jobs are enabled. When it is set to Off, color fax jobs are disabled.

Note: Off is the factory default setting.

Understanding printer menus

139

Page 139
Image 139
Lexmark 560n manual 139