3Press or repeatedly until Admin Menu appears, and then press OK.

4Press or repeatedly until System Settings appears, and then press OK.

5Press or repeatedly until Power Saver Timer appears, and then press OK.

6Press OK.

7 Press or repeatedly until to select Mode 1 (Printer) or Mode 2 (System), and then press OK.

8Press or repeatedly to adjust the time, or use the keypad to enter a value, and then press OK.

9Press repeatedly until Select Function appears.

Setting the Auto Reset

Setting the Auto Reset specifies the time the printer waits for further printer control panel input before automatically returning to Select Function.

1Make sure the printer is on and Select Function appears.

2From the printer control panel, press System.

3Press or repeatedly until Admin Menu appears, and then press OK.

4Press or repeatedly until System Settings appears, and then press OK.

5Press or repeatedly until Auto Reset appears, and then press OK.

6Press or repeatedly to adjust the time, and then press OK.

7Press repeatedly until Select Function appears.

Using the Embedded Web Server

If the printer is installed on a network, the Embedded Web Server can be used for the following functions:

Checking the status of the printer

Checking the status of the printer supplies

Setting up the Address Book

Setting up the fax Speed Dial list

Configuring network settings

Creating an Embedded Web Server administrator password

To access the Embedded Web Server:

1Open a Web browser.

2In the address bar, type the network printer or print server IP address, and then press Enter.

Administrative support

171

Page 171
Image 171
Lexmark 560n manual Setting the Auto Reset, Using the Embedded Web Server, 171