Cisco Systems CIVS-IPC-2500 manual Preset Positions Window, Patrol Sequence, Zoom In button, 3-37

Chapter 3 Configuring and Managing the IP Camera

Applications Windows

Table 3-20 PTZ (RS-485) Window Options (continued)

Option Description

Patrol Sequence

Patrol Sequence

Configure the order in which the IP camera executes preset operations.

The preset list contains up to 9 positions that you configure as described in the “Preset Positions Window” section on page 3-37. The Sequence list specifies the order in which the IP camera goes to each preset position when you execute a sequence. (To execute a sequence, use the Patrol Sequence button as described in the “Home Window Controls” section on page 4-3.)

Each preset position in a sequence is called a step. A sequence can include up to 20 steps, so it can include the same preset position more than once. When the sequence executes, the IP camera goes to the first position in the Sequence list, then moves through each position in the list in order. It remains in each position for 30 seconds. It stops at the last position in the list.

To create the preset sequence, click the first desired preset position in the Preset list and click Add >>. The preset position appears in the Sequence list. Repeat this procedure as needed to create the sequence.

To remove a preset position from the Sequence list, choose the desired position and click Remove.

Preset Positions Window

If you click the Set Preset Position button in the PTZ (RS-485) window, as described in the Set Preset Position row in Table 3-20, the Preset window appears. This window displays the current video from the IP camera and provides options for configuring up to nine preset positions for the IP camera.

To use the options that are in this window, the IP camera must be installed with a motorized zoom/focus lens in a pan/tilt mount that supports the Pelco D protocol.

If you are prompted to install ActiveX controls when trying to access this window, follow the on-screen prompts to do so. ActiveX controls are required to see the video and the options.

If you change any options in the Preset window, you must click Save to save the changes. To exit this window, click Back.

Table 3-21describes the options in the Preset Positions window.

Table 3-21 Preset Positions Options

Option	Description
Zoom In button	Use these buttons to control optical zooming for the IP camera.
Zoom Out button

	Cisco Video Surveillance 2500 Series IP Camera User Guide
OL-19273-02		3-37