Cisco Systems CIVS-IPC-2500 Save, enabling audio, see the “Audio Window” section on page, Control

Chapter 4 Viewing Live Video

Viewing Video through the Home Window Overview

Table 4-1	Home Window Controls (continued)
Control		Description
Snapshot button		Captures and saves a snapshot image of the current video image in the format and
		location of your choice, and with the file name of your choice.
		When you click this button, follow these steps to save the image:
		1. In the Snapshot window, click Save.
		2. In the Save Picture As window, enter the path and folder for the image, the file
		name for the image, and the format (BMP or JPG) for the image, then click
		Save.
Speaker Off		Click the Speaker Off button to mute audio that is sent from the IP camera to the
toggle button		PC that you are using. The button changes to the Speaker On button. Click the
		Speaker On button to unmute audio. The button changes to the Speaker Off button.
		These buttons appear if audio is enabled for the IP camera. For information about
		enabling audio, see the “Audio Window” section on page 3-24.
Speaker On
toggle button

Speaker Volume	Appears to the right of the Speaker On or Speaker Off button if audio is enabled for
slider	the IP camera. When the speaker is unmuted, use this slider to adjust the volume at
	which your PC speakers play the audio from the IP camera.
	For information about enabling audio, see the “Audio Window” section on
	page 3-24.
Microphone Off	Click the Microphone Off button to mute the audio stream that is captured and sent
toggle button	to the IP camera from the internal or external microphone of the PC that you are
	using. When you click this button, the speaker that is attached to the IP camera does
	not play audio that is transmitted from your PC.
	Note If you are simultaneously accessing other IP cameras in different browser
Microphone On
	sessions on the same PC, clicking this button in one browser session does
toggle button	not mute the audio that the PC sends to the other IP cameras.
	When you click the Microphone Off button, it changes to the Microphone On
	button. Click the Microphone On button to unmute audio that is sent to the IP
	camera. The button changes to the Microphone Off button.
	These buttons appear if half-duplex or full-duplex is enabled for audio. For
	information about enabling half-duplex or full-duplex, see the “Audio Window”
	section on page 3-24.
Microphone	Appears to the right of the Microphone On button or Microphone Off button if audio
Sensitivity slider	is enabled for the IP camera. Use this slider to adjust the gain of the PC microphone
	(that is, how sensitive it is to the audio that it picks up and that is sent to the IP
	camera).

Cisco Video Surveillance 2500 Series IP Camera User Guide

OL-19273-02 4-5