Cisco Systems 2500 Series, CIVS-IPC-2500 manual Address, 3-44, Message, Explanation

Chapter 3 Configuring and Managing the IP Camera

Status Windows

		Table 3-26	Syslog and Log Information (continued)
		Message		Explanation
		NTP: Failed to synchronize data & time with the		Provides information when you configure the IP
		NTP server.		camera to obtains its time from an NTP server.
		NTP: No NTP server specified.
		NTP: Synchronization OK.
		NTP: The NTP server cannot be reached.
		output: Failed to set output port Port_Number.		Provides information when you configure the
				output ports on the IP camera.
		output: Set output port Port_Number to high OK.
		output: Set output port Port_Number to low OK.
		output: Set output port Port_Number to pulse OK.
		PTZ: Focus far.		A user clicked the Focus Far button in the Home
				window.
		PTZ: Focus near.		A user clicked the Focus Near button in the Home
				window.
		PTZ: Go to home.		A user clicked the Move Camera Home button in
				the Home window.
		PTZ: Go to Preset Position_Number.		Provides information when you pan or tilt the IP
				camera or it move it to a preset position.
		PTZ: Move down.
		PTZ: Move left.
		PTZ: Move right.
		PTZ: Move up.
		PTZ: Zoom in.
		PTZ: Zoom out.
		Sensor: Change from Day mode to Night mode.		The IP camera switched from day mode to night
				mode.
		Sensor: Change from Night mode to Day mode.		The IP camera switched from night mode to day
				mode.
		SSH: Invalid SSH login attempt. [ip: Address]		A user attempted to log in to the IP camera through
				SSH. Address is the IP address of the system that
				was used.
		SSH: SSH user logged in. [ip: Address]		A user logged in to the IP camera through SSH.
				Address is the IP address of the system that was
				used.
		SSH: SSH user logged out. [ip: Address]		A user logged out of the IP camera through SSH.
				Address is the IP address of the system that was
				used.
		Stream: HTTP stream started. [id: User, ip:		Provides information when a user accesses (HTTP
		Address]		stream started) or exits (HTTP stream stopped) the
				Home window.
		Stream: HTTP stream stopped. [id: User, ip:
		Address]		User is the IP camera user name of the user.
				Address is the IP address of the PC that was used.
	Cisco Video Surveillance 2500 Series IP Camera User Guide
3-44				OL-19273-02