Asante Technologies II A Troubleshooting, Table A-1 Troubleshooting, Problem, Indication, Action

SHBBook Page 1 Wednesday, March 3, 1999 8:03 PM

A

Troubleshooting

Table A-1 describes how to troubleshoot problems with your network and/or the Switch by monitoring the Switch’s LEDs.

Table A-1 Troubleshooting

Problem	Indication	Action
No Power	Power LED OFF	Check the power cord.
		Make sure the power outlet is functional.
		Make sure the power cord is properly connected to
		the outlet and is securely connected to the hub.
Port connection	Link Activity LED	Make sure the cable is functioning and is properly
not functioning	OFF	connected at both ends.
		Check the crimp of the RJ-45 connectors.
		Make sure the UTP cable is Category 5 for
		100Base-TX.
		Make sure the UTP cable is Category 3 for
		10Base-T.
		Make sure the cable length does not exceed 100
		meters.
Hub ID incor-	No HUB ID LED	Check with Asanté technical support.
rect	lit, or same HUB
	ID LED lit on two
	hubs

Page A-1