Asante Technologies Adding Fiber Optic Connectivity via MII, MII Module Slot on rear panel

SHBBook Page 11 Wednesday, March 3, 1999 8:03 PM

Connecting Network Devices

Adding Fiber Optic Connectivity via MII

To add connectivity for 100Base-FX transmission media, insert the optional MII fiber-optic module in the MII Module Slot in the back panel of the hub, as shown in Figure 2-11. If you have not installed a management module, this slot will be available for the fiber-optic connection module.

The MII Module Slot in the front panel of the hub is reserved for use when there is a management module installed in the Management Module Slot on the rear panel. For information on the use of this slot, see the Management Module manual.

◆Note: Do not use the MII Module Slot on the front panel to install a fiber-optic module unless you have installed a man- agement module in the rear panel.

Management Module Slot

MII Module

Figure 2-11 MII Module Slot on rear panel

Page 2-11