J. Resetting Your Spa
Just like your computer at home, you spa electronics could get corrupted by electrical surges or spikes, or by low voltage. This could result in improper operation. Anytime there is reason to believe that your system is not operating properly, please follow the following resetting procedure:
1.Turn the power to the off for 15 full minutes
2.Turn the power back on.
3.Press “PROG”to show time.
4.Press and hold the “UP”arrow for 5 seconds. The control display will show 12:00 p.m. as soon as you release the “UP”arrow indicating a successful reset.
The set temperature and filtration hours will be reset to their factory
— 15 —
