
| Section |
Operating this unit | 02 |
|
|
Audio Adjustments
Introduction of audio adjustments
1
1Audio display
Shows the audio adjustment status.
1Press
FUNCTION, AUDIO and ENTERTAINMENT appear on the display.
2Use
The audio function name appears on the dis- play.
3Turn
Turn
Fader (balance
level adjustment)
# You can also select the audio function by
pressing AUDIO on the remote control.
# You can select the Sub W.2 only when sub-
woofer output is turned on in Sub W.1.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press
Using balance adjustment
You can change the fader/balance setting so that it can provide you an ideal listening envir- onment in all occupied seats.
1Use
# If the balance setting has been previously ad- justed, Balance will be displayed.
2Push
Each time
F 15 to R 15 is displayed as the front/rear
speaker balance moves from front to rear.
# F/R 0 is the proper setting when only two
speakers are used.
# When the rear output setting is Rear SP :S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 26.
3Push
Each time
L 15 to R 15 is displayed as the left/right speaker balance moves from left to right.
Using the equalizer
The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:
English
BAND. | Display | Equalizer curve | |
# If you do not operate functions except for |
|
| |
Powerful | Powerful | ||
50Hz within about 30 seconds, the display is | |||
|
| ||
Natural | Natural | ||
automatically returned to the ordinary display. | |||
| Vocal | Vocal | |
|
|
|
En 21