Entering PIN code for Bluetooth

wireless connection

Toconnect your cellular phone to this unit via
Bluetoothwireless technology, you need to
enterPIN code on your phone to verify the
connection.The default code is 0000, but you
canchange this in this function.
!Withsome Bluetooth audio players, you
maybe required to enter to this unit inad-
vancePIN code of your Bluetooth audio
player,in order to set this unit ready for a
connectionfrom your Bluetooth audio
player.
!Onlywhen Bluetooth adapter (e.g. CD-
BTB100)is connected to this unit, you can
operatethis function.
1 UseMULTI-CONTROL to select
Pincode input.
2 PushMULTI-CONTROL up or down to
selecta number.
3 PushMULTI-CONTROL left or right to
movethe cursor to the previous or next po-
sition.
4 Afterinputting PIN code (up to 16 di-
gits),press MULTI-CONTROL.
PINcode you entered is now standby to be
storedin memory.
Whenyou press MULTI-CONTROL again on
thesame display, the PIN code you entered is
storedin this unit.
#PushingMULTI-CONTROL right in the confir-
mationdisplay returns you to the PIN code input
display,and you can change the PIN code.
Other Functions

Using the AUX source

Thisunit can control up to two auxiliar y equip-
mentssuch as VCR or portable devices(sold
separately).When connected, auxiliar y equip-
mentsare automatically read in as AUX
sourcesand assigned to AUX1 or AUX2. The
relationshipbetween AUX1 and AUX2
sourcesis explained below.

AboutAUX1 and AUX2

Youhave two methods to connect auxiliary
equipmentsto this unit.

AUX1source:

Whenconnecting auxiliar y equipment using a
stereomini plug cable
%Insertthe stereo mini plug intothe
inputjack on this unit.
Formore details, refer to the installation man-
ual.
Theallocation of this auxiliar y equipment is
automaticallyset to AUX1.

AUX2source:

Whenconnecting auxiliar y equipment using an
IP-BUS-RCAInterconnector (sold separately)
%Usean IP-BUS-RCA Interconnector such
asthe CD-RB20/CD-RB10 (sold separetely)
toconnect this unit to auxiliary equipment
featuringRCA output.
Formore details, refer to the IP-BUS-RCA Inter-
connectorowner ’s manual.
Theallocation of this auxiliar y equipment is
automaticallyset to AUX2.
#Youcan only make this type of connection if
theauxiliary equipment has RCA outputs.
Operating this unit
En
28
Section
02