Belkin PM01122EA-B I can’t connect to the Internet wirelessly, Troubleshooting, sections

Troubleshooting

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

I can’t connect to the Internet wirelessly.

If you are unable to connect to the Internet from a wireless computer, please check the following items:

1.Look at the lights on your Router. If you’re using a Belkin Router, the lights should be as follows:

•The “router” LED should be on.

•The “modem” light should be on, and not blinking.

•The “internet” LED should be on, and not blinking.

•The “wireless” light should be on, not blinking.

2.Open your wireless utility software by clicking on the icon in the system tray at the bottom, right-hand corner of the screen.

3.The exact window that opens will vary depending on the model of wireless card you have; however, any of the utilities should have a list of “Available Networks”—those wireless networks it can connect to.

Does the name of your wireless network appear in the results?

Yes, my network name is listed—go to the troubleshooting solution titled “I can’t connect to the Internet wirelessly, but my network name is listed”.

No, my network name is not listed—go to the troubleshooting solution titled “I can’t connect to the Internet wirelessly, and my network name is not listed”.

I can’t connect to the Internet wirelessly, but my network name is listed.

If the name of your network is listed in the “Available Networks” list, please follow the steps below to connect wirelessly:

1.Click on the correct network name in the “Available Networks” list.

2.If the network has security (encryption) enabled, you will need to enter the network key. For more information regarding security, see the section entitled “Changing the Wireless Security Settings”.

3.Within a few seconds, the tray icon in the lower, left-hand corner of your screen should turn green, indication of a successful connection to the network.

N Wireless Router 78