Installing the SAN Switch 2/8
Connecting the SAN Switch 2/8 to the LAN
Use the following steps to connect the SAN Switch 2/8 to the Ethernet Local Area Network (LAN) segment.
1.Remove the shipping plug from the SAN Switch 2/8 Ethernet port.
2.Connect one end of an Ethernet cable to the Ethernet port, see Figure 16.
Figure 16: Connecting the Ethernet cable
3.Connect the other end of the Ethernet cable to the workstation or to an Ethernet network containing the workstation.
Note: You can now access the switch remotely (and from multiple connections), using telnet or the Web Tools application. Verify that the switch is not accessed from any other connections during the remaining steps.
4.Log on to the switch with administrative privileges by telnet. The default administrative logon is admin and the default password is password.
50 | hp StorageWorks SAN Switch 2/8 Installation Guide |
