HP AA-RSB6B-TE manual Installing the tinnerman clips

Installing the SAN Switch 2/8

3.Install two M5 U-type Tinnerman clips for each of the front columns of the rack in the top and bottom positions of the three-hole EIA pattern as shown in Figure 9.

2 1

SHR-255

1 M5 U-type tinnerman clips 2 Upright rack post

Figure 9: Installing the tinnerman clips

4.Assemble the outer rails by completing the following steps:

a.As an aid in assembly, two rubber washers have been included to help keep the rear slotted portion of the outer rail flush against the rear rail-traybrackets. Install them as shown in Figure 10.

40 hp StorageWorks SAN Switch 2/8 Installation Guide