Installing the SAN Switch 2/8
3. Enter y after the Fabric Parameters prompt.
Fabric parameters (y, n)
4.Enter a unique domain ID (such as the domain ID used by the previous switch, if still available).
Domain: (1..239) [1] 3
5.Complete the remaining prompts (or press CTRL+D to accept the remaining settings without completing all the prompts).
6.
switchEnable
Specifying Custom Status Policies
Optional. If desired, specify any custom status policies for the fabric as follows.
1. Enter the following at the prompt.
switchStatusPolicySet
2.Specify the desired status policies. To completely deactivate the alarm for a particular condition, enter 0 at the prompt for that condition.
54 | hp StorageWorks SAN Switch 2/8 Installation Guide |
