Managing the SAN Switch 2/8
Displaying the Optional Feature Licenses
Use these steps to display optional features installed on your switch.
1.Log in to the switch as the admin user.
2.At the command line type, licenseShow
This command displays the license keys that have been entered for the switch and the features enabled by those licenses.
Enabling Licensed Features
Licensed features such as QuickLoop and Fabric Watch are already loaded onto the switch firmware, but must be enabled with a license key. Once you have purchased these features you are provided with a key to unlock the feature.
Use these steps to enable a licensed feature.
1.Log in to the switch as the admin user.
2.At the command line enter the following command: licenseAdd aaaBbbCcc
(where aaaBbbCcc is the license key for a particular feature.)
Note: You must enter a license key for each feature to activate. License keys are case sensitive.
66 | hp StorageWorks SAN Switch 2/8 Installation Guide |
