
SUBMITTING PRINT JOBS USING WINDOWS NT 4.0 DRIVERS
Setting the image shift
You can use the Image Shift option to offset the printed image from the edges of the page. This is particularly useful for bound or drilled jobs. The image shift setting is applied automatically to both sides of the print for
1.From the DocuPrint NPS Setup window, set the unit of measure by selecting the Preferences icon. Refer to the section “Setting the preferences” for more information.
2.To specify a horizontal image shift, enter the number of units to shift the image from the left edge of the page in the X text box. A positive number shifts the image to the right, and a negative number shifts the image to the left.
3.To specify a vertical image shift, enter the number of units to shift the image from the top edge of the page in the Y text box. A positive number shifts the image up, and a negative number shifts the image down.
Note: An image shift set with the Image Shift option may interfere with any binding offset set in the document file by the application.
Specifying the paper weight
On the Paper Stocks window, enter the number of grams per square meter in the [Weight] box. You can enter a number in the range 60 to 413. The default is 75 g/m2.
Programming the Main Stock (Stock 1)
This area allows you to specify the paper type, size and color. Refer to the section “Specifying paper stocks” for detail.
Selecting the finishing features
The finishing features that are available on your printer determine the format of the completed print job. DocuPrint always collates the pages of a document in sequential order unless “no collating” options are selected.
1.From the DocuPrint NPS Setup window, click the [Finishing] list box.
2.Click the option you want to use.
Note: [No Finishing] indicates that the document is not bound or stapled.
GUIDE TO SUBMITTING JOBS FROM THE CLIENT |