Xerox 721P87481 manual Removing DOS client software

SETTING UP WORKSTATIONS

Removing DOS client software

This section describes the procedure for removing the print command client software. You may need to perform this procedure prior to updating software, or to correct corrupted file installation on the platform. The steps are shown below.

C:/> cd \usr\xerox\nps\client

C:/> del cconf

C:/> cd \usr\xerox\nps\client\bin

C:/> del listq.exe

C:/> del print.exe

C:/> del listjob.exe

C:/> cd ..\man

C:/> del listq

C:/> del listjob

C:/> del print

C:/> cd ..\gpj

C:/> del xrxgpj1.ps

C:/> del xrxgpj2.ps

Note: If the wrong software has been loaded on the client, the executable files may have the wrong extension. If this is the case, delete everything under the above directories.

If there are any files named print, listq, or listjob in the directories, /bin, or /usr/bin, delete them also.

Make sure that the DOS print command is not accidentally removed instead of the DocuPrint NPS print command. If you are not sure which command it is, type print <Enter>. The NPS command will always give a usage statement.

2-6 GUIDE TO SUBMITTING JOBS FROM THE CLIENT