SETTING UP WORKSTATIONS

Installing Xerox Client Software for UNIX

You install Xerox Client Software on client workstations using the ftp command to log on to the Printer Controller, retrieve an installation command file, and execute it. This procedure automatically downloads the software.

Note: In order for jobs submitted by Xerox Client software to print, Xerox job ticket processing must be enabled. This is specified during installation or by using the Configure utility. Also, in order to download the client software, FTP capability must be enabled on the controller. This is specified during installation or via the Configure utility. If security is a concern, FTP capability can be disabled after the software is downloaded by using Configure. For more information, see the chapter “Using utility commands” in your Guide to Configuring and Managing the System.

At the client workstation, log on to the client as root and perform the following steps:

1.Verify that the Printer Controller name and TCP/IP address are located in the /etc/hosts file.

2.If an entry containing the Printer Controller name and TCP/IP address does not exist, add it unless you are using an NIS or DNS name service.

3.To verify that the client workstation can communicate with the Printer Controller, enter one of the following utility commands at the > prompt:

ping <Printer Controller name>

ftp <Printer Controller name>

If the response to these commands is “unknown host,” go back to step 1.

4.Change directories to the user home directory.

Note: You can use any directory to execute the command file, but using the home directory is preferred.

5.Find the client directory and command file for your client platform in the table below.

Client platform

Client directory

Command file

 

 

 

SunOS 4.1.x and 4.0

SUN4

instsun4

 

 

 

Sun Solaris

SOLARIS

instsolaris

 

 

 

DEC ULTRIX 4.3 (MIPS)

DEC__ULT

instult

 

 

 

HP 9000 HP-UX 10.01

HP__UX

insthpux

 

 

 

RS 6000 IBM AIX 4.1

IBM__AIX

instibmaix

 

 

 

MS-DOS Sun PC-NFS

MS__DOS__NFS

instnfs.bat

 

 

 

MS-DOS FTP

MS__DOS__FTP

instftp.bat

 

 

 

MS-DOS Wollongong

MS__DOS__PATH

instpat.bat

Pathway Access

WAY

 

 

 

 

2-10

GUIDE TO SUBMITTING JOBS FROM THE CLIENT

Page 30
Image 30
Xerox 721P87481 manual Installing Xerox Client Software for Unix, Way