PRINTING USING XEROX UTILITIES AND LPR UTILITIES (DOS AND UNIX)

Printing using lpr utilities

You may print a document using the following lpr utilities:

lpr (DOS and UNIX)

lpq (DOS and UNIX)

lprm (DOS and UNIX)

lpc (UNIX only)

Using lpr utilities in DOS To use these lpr utilities in DOS:

If you are using FTP PC-TCP/IP software, these commands are available with DocuPrint. Refer to your software documentation for a description of all the options available.

If you are using the Wollongong Pathway Access network communication package, you can use the lpr command to print jobs, but the -C options are not available. Refer to the documentation you received with your Wollongong software for complete information.

If you are using Sun PC-NFS, you may be able to submit jobs to DocuPrint if your system is configured to do so. Ask your system administrator to verify this information. For complete information on setting up the print capability, refer to your PC- NFS software documentation.

To check status of jobs, use the Telnet utility.

Using lpr utilities in UNIX To use these lpr utilities in UNIX:

If you are using Sun PC-NFS, you may be able to submit jobs to DocuPrint if your system is configured to do so. Ask your system administrator to verify this information. For complete information on setting up the print capability, refer to your PC- NFS software documentation.

All UNIX commands and options are case-sensitive.

To check status of jobs, use the Telnet utility.

The following sections provide the syntax, required arguments, and options for the lpr utilities commands lpr, lpq, lprm, and lpc.

GUIDE TO SUBMITTING JOBS FROM THE CLIENT

3-15

Page 53
Image 53
Xerox 721P87481 manual Printing using lpr utilities