SUBMITTING PRINT JOBS USING WINDOWS NT 4.0 DRIVERS
For models 96, 4635 and 180 NPS:
•[Precut Tab] selects the number of tabs per set. The default is a
•[Full Cut Tab] selects one tab per set, which runs down along the side edge.
Selecting the paper stock color
Follow these steps to select the paper stock color:
1.On the Paper Stocks window, click the [Color] list box.
2.Click the color you want to use.
If you click [Custom], enter the custom color name of the stock in the text box (up to 27 characters).
Selecting drilled stock
To use drilled paper for your print jobs, click the [Drilled] check box in the Paper Stocks window.
Specifying Special Pages
You can use the Special Pages dialog to specify paper stock for any pages or range of pages in the print job. For example, you may want to print a page or range of pages on transparency stock.
If you specify overlapping page ranges, the system automatically consolidates the information for you. For example, you may have specified blue stock for pages 1 through 50 of a document. If you later define a page range of 5 through 10 using green stock, the system will show the following information in the Special Pages List:
Pages |
| Stock |
|
1: | 4 | 1 | (for blue stock) |
5: | 10 | 2 | (for green stock) |
11: | 50 | 1 | (for blue stock) |
The Special Pages dialog includes a Stocks... icon that provides access to the Paper Stocks dialog. This dialog can remain open while you are programming the Special Pages, and you can toggle back and forth between the dialogs. See “Specifying paper stocks” for more information about using the Paper Stocks dialog.
GUIDE TO SUBMITTING JOBS FROM THE CLIENT |
