Xerox 721P87481 manual Printing from Windows NT, XDP92C.PPD

SUBMITTING PRINT JOBS USING WINDOWS NT 4.0 DRIVERS

Printing from Windows NT 4.0

You can send documents to your DocuPrint printers from Windows

NT 4.0 in several ways:

•

•

From within your Windows applications, using the Xerox DocuPrint PostScript level 2 printer driver.

From within your Windows applications, using the Windows NT native printer driver and the appropriate DocuPrint NPS PPD file (see list below).

•

•

•

From within your Windows applications, using a third-party PostScript or PCL printer driver.

Note: If you use a third-party PostScript printer driver, some drivers provide access to Xerox printer-specific features by using the following Xerox PPD files:

—XDP4850.PPD

—XDP4890.PPD

—XDP92C.PPD

—XDP4050.PPD

—XDP4090.PPD

—XDP4635.PPD

—XDP180.PPD

—XDP96.PPD

Caution: Third-party printer drivers have not been tested with DocuPrint NPS. Make sure to test any third-party driver for compatibility with your system.

From the Xerox Document Submission (XDS) software.

From the Xerox Quick Print software.

Both XDS and Quick Print provide a series of dialog boxes you use to select a document (PDL or print ready file), set up a job ticket, and submit your print job.

The following sections explain how to print from your Windows NT

4.0applications. For information on printing through the XDS software, refer to the Guide to job submission for Windows 3.1/95/NT

4.0.For information on printing through the Quick Print software, refer to the chapter “Submitting print jobs from Quick Print for Windows NT 4.0” in this guide.

GUIDE TO SUBMITTING JOBS FROM THE CLIENT 5-7