PRINTING USING XEROX UTILITIES AND LPR UTILITIES (DOS AND UNIX)
Specifies the colored parts of the document that convert to the available highlight color. The map color option determines which parts of the document print in color and which in shades of gray. Acceptable values are “red,” “green,” “blue,” “cardinal,” “brown,” “yellow,” “royalblue,” “ruby,” “violet,” “cyan,” “magenta,” and “black.”
For example, if you specify the map color as red, all the red parts of your document (including portions of composite colors such as purple depending on the rendering algorithm) are printed in the available highlight color. The other colored parts of the document are printed in shades of gray.
Note: Black can be used for the map color option where the entire document is in black, and you wish the content to be mapped into the highlight color. If you use this option for documents containing color, results are unpredictable and likely to be unacceptable.
See “Color mismatch” for further information on how the highlight color options work together.
Specifies the job message you want to print on the banner page (up to 100 characters). If the message contains spaces, enclose the message in quotes (“”).
Sets the document’s paper type to “transparency.” To use this option, set the paper type at the Printer Controller to “transparency.” To use this option with the
Specifies the page orientation you want to use. Accepted values are “portrait” and “landscape.” This option is valid for ASCII jobs only.
GUIDE TO SUBMITTING JOBS FROM THE CLIENT |
