Belkin PM01122EA-B Connecting and Configuring your Router, Modem Requirements, Ethernet USB

Connecting and Configuring your Router

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

Verify the contents of your box. You should have the following:

•Belkin N Wireless Router

•Quick Installation Guide

•LED Troubleshooting Guide

•Security Setup Guide

•EZI Setup Assistant CD

•Power Supply

•RJ45 Ethernet Networking Cable (with User Manual on CD-ROM)

Modem Requirements

Your cable or DSL modem must be equipped with an RJ45 Ethernet port. Many modems have both an RJ45 Ethernet port and a USB connection. If you have a modem with both Ethernet and USB, and are using the USB connection at this time, you will be instructed to use the RJ45 Ethernet port during the installation procedure. If your modem has only a USB port, you can request a different type of modem from your ISP, or you can, in some cases, purchase a modem that has an RJ45 Ethernet port on it.

Setup Assistant

Belkin has provided our Setup Assistant software to make installing your Router a simple and easy task. You can use it to get your Router up and running in minutes. The Setup Assistant requires that your computer be connected directly to your Router and that the Internet connection is active and working at the time of installation. If it is not, you must use the “Alternate Setup Method” section of this User Manual to configure your Router. Additionally, if you are using an operating system other than Windows 2000, XP, or Vista, or Mac OS X v10.x, you must set up the Router using the “Alternate Setup Method” section of this User Manual.

Ethernet USB

N Wireless Router 11