Available accessories TV tuner | Pioneer DEH-P590IB instruction

Section

03 Available accessories

TV tuner		Storing and recalling broadcast
Basic Operations		stations
Basic Operations		You can easily store up to 12 broadcast sta-
You can use this unit to control a TV tuner,		You can easily store up to 12 broadcast sta-
You can use this unit to control a TV tuner,		tions for later recall.
which is sold separately.		tions for later recall.
which is sold separately.		! Up to 24 stations, 12 for each of two TV
For details concerning operation, refer to the		! Up to 24 stations, 12 for each of two TV
For details concerning operation, refer to the		bands, can be stored in memory.
TV tuner’s operation manual. This section pro-		bands, can be stored in memory.
TV tuner’s operation manual. This section pro-
vides information on TV operations with this		1 When you find a station that you want
unit which differs from that described in the		to store in memory press LIST.
TV tuner’s operation manual.		2 Use MULTI-CONTROL to store the se-
1	2	2 Use MULTI-CONTROL to store the se-
1	2	lected station in memory.
		lected station in memory.
		Turn to change the preset number; press and
		Turn to change the preset number; press and
		hold to store.
		The preset number you have selected will
		flash and then remain lit. The selected station
		has been stored in memory.

1Band indicator

2Preset number indicator

3Channel indicator

1Press SOURCE to select the TV.

2Press BAND to select a band.

Press BAND until the desired band is dis- played, TV-1 or TV-2.

3To perform manual tuning, push MULTI-CONTROL left or right.

4To perform seek tuning, push and hold MULTI-CONTROL left or right for about one second and release.

The tuner will scan the channels until a broad- cast strong enough for good reception is

found.

# You can cancel seek tuning by pushing

MULTI-CONTROL left or right.

# If you push and hold MULTI-CONTROL left or right, you can skip broadcasting channels. Seek tuning starts as soon as you release

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station; press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# If you do not operate the list within about 30 seconds, the display is automatically returned to the ordinary display.

You can also store and recall stations assigned to preset tuning numbers P.CH1 to P.CH6 by using the remote control.

%When you find a station that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing.

The number you have pressed will flash in the preset number indicator and then remain lit. The selected station has been stored in mem- ory.

The next time you press the same preset tun- ing button the station is recalled from mem-

ory.

# You can also recall stations assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the channel display.

56 En