
| Section |
Operating this unit | 02 |
|
|
!External unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two exter- nal units are connected, the allocation of them to external unit 1 or external unit 2 is automatically set by this unit.
!When this unit’s blue/white lead is connected to the vehicle’s
Adjusting the volume
%Use MULTI-CONTROL to adjust the sound level.
Tuner
Basic Operations
1 2 3 4 5
6
1Band indicator
2Stereo (5) indicator
Shows when the selected frequency is being broadcast in stereo.
3LOC indicator
Shows when local seek tuning is on.
4Preset number indicator
5Signal level indicator
Shows the radio wave strength.
6Frequency indicator
1Press SOURCE to select the tuner.
2Press BAND to select a band.
Press BAND until the desired band is dis- played,
3To perform manual tuning, push
4To perform seek tuning, push and hold
The tuner will scan the frequencies until a broadcast strong enough for good reception is
found.
# You can cancel seek tuning by pushing
# If you push and hold
English
En 11