![](/images/new-backgrounds/1297240/29724047x1.webp)
Section
02
Operating this unit
2Push
0to +6 is displayed as the level is increased or decreased.
Using the high pass filter
When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are outputted from the front or rear speakers.
1Use
2Press
80Hz appears in the display. High pass filter is
now on.
# If the high pass filter has been previously ad- justed, the frequency of that previously selected
will be displayed instead of 80Hz.
# To turn high pass filter off, press
3Push
Each time
2Use
3Push
Each time
Notes
!The AM tuner volume level can also be ad- justed with source level adjustments.
!The
!XM tuner and SIRIUS tuner are set to the same source level adjustment volume auto- matically.
!External unit 1 and external unit 2 are set to
the same source level adjustment volume automatically.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.
!Settings are based on the FM tuner volume level, which remains unchanged.
1Compare the FM tuner volume level with the level of the source you wish to ad- just.
24
En