Pioneer DEH-P590IB Registering connected cellular phone, Deleting a registered phone

Section

03Available accessories

4Press MULTI-CONTROL to connect the selected cellular phone.

While connecting, Connecting flashes. To complete the connection, please check the de- vice name (Pioneer BT Unit) and enter the link code on your cellular phone. If the con- nection is established, Connected is dis-

played.

# The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 28.

Using a cellular phone to initiate a connection

1Use MULTI-CONTROL to select Connection open in the function menu.

2Press MULTI-CONTROL to open the con- nection.

Always waiting is displayed and the unit is now on standby for connection from cellular phone.

Registering connected cellular phone

1Use MULTI-CONTROL to select Set phone in the function menu.

2Push MULTI-CONTROL up or down to select a registration assignment.

P1 (user phone 1)—P2 (user phone 2)—P3 (user phone 3)—G1 (guest phone 1)—G2

(guest phone 2)

# As you select each assignment, you can see whether or not a phone is already registered there. If the assignment is empty, No data is dis- played. If the assignment is already taken, the de- vice name appears. To replace an assignment with a new phone, first delete the current assign- ment. For more detailed instructions, see Deleting a registered phone on this page.

3Press MULTI-CONTROL to register the currenctly connected phone.

When the registration is completed,

Reg. Completed is displayed.

# If the registration failed, Reg. ERROR is dis-

3Use cellular phone to connect to this

unit.

# The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 28.

played. In this case, return to step 1 and try again.

Deleting a registered phone

1Use MULTI-CONTROL to select Delete phone in the function menu.

Disconnecting a cellular phone

1Use MULTI-CONTROL to select Disconnect phone in the function menu. Device name of the connected phone appears in the display.

2Press MULTI-CONTROL to disconnect a cellular phone from this unit.

After the disconnection is completed, Disconnected is displayed.

2Push MULTI-CONTROL up or down to select a registration assignment.

P1 (user phone 1)—P2 (user phone 2)—P3 (user phone 3)—G1 (guest phone 1)—G2

(guest phone 2)

# If the assignment is empty, No data is dis-

played and the operation is not possible.

# If you need to know the BD (Bluetooth Device) address of the phone, push MULTI-CONTROL left here.

3Push MULTI-CONTROL right to select Delete YES.

Delete YES is displayed. Deleting phone is now on standby.

44 En