CD Operation

Removing the CD

➮Press the button, 1.

The control unit opens to the front.

➮Press the button on the opened con- trol unit.

The CD is ejected.

➮Carefully remove the CD.

Note:

If you do not remove the CD within 30 sec- onds it will be drawn back into the drive.

Selecting a track

➮Press one of the buttons in the arrow button group, 7, as often as needed for the number of the desired track to appear in the display.

If the or button, 7, is pressed once the current track will be started again.

Scanning tracks (SCAN)

You can hear a brief sample from all the tracks on the CD.

➮Press the softkey, 4, indicating “SCA”.

“SCAN” appears in the display. The tracks on the CD are played in ascending order.

Note:

The duration of the samples can be adjusted. For information on setting the sampling dura- tion, read the paragraphs on “Adjusting the Sample Duration” in the “Radio Operation” section.

Stopping the SCAN to continue listening to a track

➮Press the softkey, 4, indicating “SCA” again.

The track that is currently being sampled will continue to be played.

Fast searching (audible)

In order to search rapidly backwards or for- wards

➮hold down one of the , or but- tons, 7, until the fast search back- wards of forwards starts.

Random Track Replay (MIX)

➮Press the softkey, 4, indicating “MIX”.

“MIX CD” appears briefly on the display. The next track to be played will be selected at ran- dom.

Ending MIX

➮Press the softkey, 4, indicating “MIX” again.

“MIX OFF” appears briefly on the display.

Repeating tracks (REPEAT)

➮Press the softkey, 4, indicating “RPT”.

The title will be repeated until RPT is deactiv- ated.

Stopping REPEAT

➮Press the softkey, 4, indicating “RPT” again.

Play continues as normal.

Changing the display contents

You can choose between different display modes during CD operation:

●Display of track number and time.

●Display of track number and play time.

●Display of CD name and track number.

➮In order to change between the display modes, press the DIS button, :, as of- ten as you need for the desired informa- tion to be shown on the display.