Blaupunkt Orlando CD70, Denver CD70 CD changer operation optional, CD Changer Operation

Page 23

CD CHANGER OPERATION

CD changer operation (optional)

On page 34 of this guide you can find which CD changers can be used with this device. You can also refer to your Blaupunkt dealer.

Note:

The operating instructions for your CD chang- er will provide information about handling CDs, inserting them and operating the CD changer.

Starting CD changer operation

Press the CDC button, =.

The CD changer menu is displayed, and play will continue from the point where it was last interrupted. If the magazine is removed from the CD changer and re-inserted, play will start with the first track on the first CD detected by the CD changer.

Selecting a CD

In order to change up or down to anoth- er CD, press the or button, 7, until the number of the CD you want appears on the display.

Selecting a track

In order to change up or down to anoth-

er track on the current CD, press the or button, 7, until the number of the track you want appears on the display.

If the button, 7, is pressed once the cur- rent track is started again.

Fast searching (audible)

In order to search rapidly backwards or for- wards

hold down one of the or buttons, 7, until the fast search backwards of forwards starts.

Changing the display contents

You can choose between different display modes during CD changer operation:

Display of CD number, track number and time.

Display of CD number, track number and playing time.

Display of CD name and track number.

In order to change between the display modes, press the DIS button, :, as of- ten as you need for the desired informa- tion to be shown on the display.

Note:

It is only possible for a CD name to be dis- played if the inserted CD has been provided with a name. Read the section on “Naming CDs”.

Repeat play of individual tracks or whole CDs (REPEAT)

Press the softkey, 4, indicating “RPT”. “RPT TRCK” appears briefly on the display.

In order to repeat play of the whole CD, press the softkey, 4, indicating “RPT” again.

“RPT DISC” appears briefly on the display.

Stopping REPEAT

In order to stop repeating either the current track or the current CD

press the softkey, 4, indicating “RPT” as often as necessary for the “RPT OFF” to be shown in the display.

Playing tracks in random sequence (MIX)

In order to play the tracks on the current CD in a random sequence

Press the softkey, 4, indicating “MIX”. “MIX CD” appears briefly on the display.

ENGLISH

51

Image 23
Contents Denver CD70 Hamburg CD70 Orlando CD70 Phoenix CD70 Page 14 13 Operating Elements Contents Fitting Road safetyAccessories GuaranteeRemoving the KeyCard KeyCard theft protectionTheft Protection Inserting the KeyCardVisual theft protection LED KeyCard lost or damagedTraining a new KeyCard / entering the master code Theft Protection Switching on and OFF Switching on and offVolume Adjusting the volumeTone and Volume Tone and volumeDisplay Adjusting the displayAdjusting the viewing angle Adjusting the display brightnessRDS convenience function AF, REG Switching on radio operationRadio Operation Radio OperationSelect waveband/memory level Setting the stationAdjusting the sensitivity of the station search Scanning through stations Going to a preset stationSaving a station Saving a station automatically TravelstoreProgram type PTY Adjusting the sample duration ScantimeOptimising radio reception Radio Operation Traffic Information Switching between stereo and monoSwitching traffic information priority on and off Traffic InformationStarting CD operation and inserting the CD Adjusting the volume for traffic announcementsCD operation CD Operation Programming favourite CD tracks Traffic announcements with CD operationNaming CDs CD Changer Operation CD changer operation optionalSampling all tracks on all CDs Scan Release the OK button 5. The CD name has been deleted CD Changer Operation Time Setting the timeClock Time Equalizer Selecting 12/24-hour clock modeAdjustment instructions Switching the equalizer on and offAdjusting the level indicator Adjusting the equalizerAdjusting the sharpness of the filter Selecting the tone presetTone impression/problem Action Equalizer adjustment guideExternal Audio Sources TMC Switching the AUX input on and offExternal audio sources TMC for dynamic navigation systemsPRE-AMPLIFIER / Subout Technical dataPre-amplifier / subout