Radio mode
Setting the sensitivity of station seek tuning
You can choose whether the radio should only tune into stations providing good re- ception or whether it can also tune into those with a weak reception.
Press the MENU button 9.
Press the 
or 
button :repeatedly until "SENS" appears on the display.
The display shows the currently set sensitiv- ity level. "SENS HI3" means that the tuner is set to the highest sensitivity setting. "SENS LO1" means it is set to the lowest sensitiv- ity setting.
Set the desired sensitivity level using the 
or 
button :.
When you have finished making your chang- es,
press the MENU button 9.
Note:
You can set different sensitivity levels for FM and MW or LW (AM).
Storing stations
Storing stations manually
Select the desired memory bank (FM1, FM2, FMT) or one of the wavebands (MW or LW).
Tune into the desired station.
Press and hold down one of the station buttons 1 - 6 for longer than two sec- onds to assign the station to that but- ton.
Storing stations automatically (Travelstore)
You can automatically store the six stations offering the strongest reception in the re- gion (FM only). The stations are stored in the FMT memory bank.
Note:
Any stations that were previously stored in this memory bank are deleted in the process.
Press and hold down the BND•TS but- ton 6for longer than two seconds.
The storing procedure begins. "FM TSTORE" appears on the display. After the process has completed, the radio will play the sta- tion that is stored in memory location 1 of the FMT memory bank.
Listening to stored stations
Select the memory bank or waveband.
Press one of the station buttons 1 - 6
;.
The stored station is played if it can be re- ceived.
Scanning receivable stations (SCAN)
You can use the scan function to play all the receivable stations briefly. You can set the scanning time in the menu to between 5 and 30 seconds.
Starting SCAN
Press and hold down the MENU button 9for longer than two seconds.
Scanning begins.
46