Blaupunkt MP36 operating instructions Selecting the waveband/memory bank, Tuning into a station

Switching the RDS function on/off

To switch the RDS functions AF and REGIONAL on or off,

press and hold down the TRA•RDS but- ton 7for longer than two seconds.

The RDS functions are active when RDS lights up in the display.

Selecting the waveband/memory bank

This device can receive programmes broad- cast over the FM frequency range as well as the MW and LW (AM) wavebands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands.

Six stations can be stored in each memory bank.

To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands,

briefly press the BND•TS button 6.

Tuning into a station

There are various ways of tuning into a sta- tion.

Automatic station seek tuning

Press the or button :.

The radio tunes into the next receivable sta- tion.

Tuning into stations manually

You can also tune into stations manually.

Note:

You can only tune into stations manu- ally if the convenient RDS function is deactivated.

To change the set frequency in small incre- ments,

Browsing through broadcasting networks (FM only)

If a radio station provides several pro- grammes, you have the option of browsing through its so-called "broadcasting net- work".

Note:

The convenient RDS function must be activated before you can use this fea- ture.

 Press the or button :to change to the next station of the broadcasting network.

Note:

When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the Scan or Travelstore function.