CD Operations, Playing the CD player | Blaupunkt MP3000 specification

BND / TS

CD Operations

Playing the CD player

Loading Discs

1. Press the OPEN and insert the disc.

2. Close the front panel. ‘‘LOADING’’ and ‘‘FILE CHECK’’ will appear in the display window.

Playback begins automatically.

Note

Make sure that the front panel is closed when playback be- gins.

Playback with the front panel open causes the unit to turn off automatically in about 10 min- utes.

Labeled side up

! NEVER Insert a 3-inch CD !

This unit is designed for playback of standard 5-inch CD’s only. Do not attempt to use 3-inch CD singles in this unit, either with or without an adaptor, as damage to the player and/or disc may occur.

Tips

•When a CD is loaded, the on the display remains lit.

•During playback of a CD, the pie-shaped signal-strength meter spins.

Listening to a disc that is already loaded

Press the	CD	to select the CD mode.
Playback begins automatically.
Pausing Playback
Press the	6/ .

To resume playback, press the 6/ again.

Stopping Playback

Press the to select the radio reception (FM1,FM2, FMT or AM, AMT).

Ejecting Discs

Press the to eject the disc located behind flip-down front panel.

Notes

•The unit will turn on automatically when a CD is inserted if the ignition switch is ‘‘ON’’.

•When the disc is ejected from the CD slot, remove it within 10 seconds; otherwise, the disc will be reloaded automati- cally.

Track Search

Press the TUN/ TRK during CD mode. Track numbers appear in the display window.

: Playback starts from the beginning of the next track.

: Playback starts from the beginning of the current track. Press again to play the previous track.

Cue / Review

Press and hold the TUN/ TRK . Release when you have found the desired point.

: To search forward.

: To search backward.

Scan Play
Press the SC/PS	during CD mode.
The ‘‘SCAN 1’’ indicator appears in the display window. This		ENGLISH
will play the first 10 seconds of all the tracks on the disc.		ENGLISH

Press the SC/PS	again to cancel this feature.
Repeat Play
Press the 5/RPT	during CD mode.
The ‘‘RPT 1’’ indicator appears in the display window and the
current track is played repeatedly.
Press the 5/RPT	again to cancel this feature.

Mix Play

Press the 4/MIX during CD mode.

The ‘‘MIX 1’’ indicator appears in the display window.

All the tracks on the current disc are played in random order. Press the 4/MIX again to cancel this feature.

Note

If the Mix, Repeat or Scan buttons are pressed for 2 seconds or longer while playing a music CD, the unit will enter the respective mode2. These modes can be used for playing MP3 discs which contain a number of folders. (See page 12.)

Since a music CD is treated as a folder, there is almost no difference in the operation.

E-11

MP3000_body_en

9/4/01, 4:24 PM