Operating the tuner
Storing stations
After locating a station, you can store it as follows:
➔Select the desired memory bank (see page 85).
➔Press the softkey for approx. two seconds to which you want to assign the station.
The station is stored. A signal tone confirms that the station has been stored. The frequency or the name of the station C
is displayed next to the softkey. The current station is high- lighted.
Note:
To automatically search for FM stations and store them in the FMT memory bank, see
Listening to stored stations
➔Select the desired memory bank (see page 85).
The tuner display displays the frequencies or names of the six stations C assigned to the softkeys 7 to < in this memo- ry bank.
➔Briefly press the softkey which is assigned to the station you want to set up.
The frequency or the name of the current station is indicated.
The selected station is played back provided that it can be received at the current vehicle position.
The station name or the fre- quency of this station appears on the main line A if the sta- tion provides this RDS informa- tion. In addition, the memory location of the radio station C is highlighted.
Scanning all receivable stations (SCAN)
➔Select the waveband (FM, MW, LW) whose receivable stations you want to scan (see page 89).
➔Press and hold the OK button A for approx. two seconds.
The tuner searches for stations in the current waveband. The main line A displays "SCAN" every two seconds.
As soon as the tuner has locat- ed a station, it is played and the station name or the station frequency appears on the main line A. The scan time can be set as described on page 121 and 122 under "SCANTIME".
After the frequency band has been completely searched once, the search stops and the station located last is played back.
NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
87