CD mode
The CD starts playing.
The display shows the CD symbol.
Notes:
•The CD symbol indicates that a CD is located in the drive.
A border surrounding the CD symbol indicates that CD is selected as au- dio source.
•If the vehicle ignition was switched off prior to inserting the CD, you
must switch in on first with the but- ton 2to start the playback.
If a CD is already inserted in the drive,
press the SRC/
button >repeated- ly until "CD" appears on the display.
Playback begins from the point at which it was last interrupted.
Selecting tracks
Press one of the arrow buttons 6 to select the next or previous track.
If you press the 
or 
button 6once, the player will play the current track again from the beginning.
Fast track selection
To quickly select tracks backwards or for- wards,
Random track play (MIX)
Press the 5 MIX button <.
"MIX CD" appears briefly on the display and the MIX symbol lights up. The next ran- domly selected track will then be played.
Cancelling MIX
Press the 5 MIX button <again.
"MIX OFF" appears briefly on the display and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks on the CD.
Press and hold down the MENU button :for longer than two seconds.
The next track will then be scanned.
Note:
You can set the scanning time. For further information, please read the section entitled "Setting the scanning time" in the "Radio mode" chapter.
Cancelling SCAN and continuing listening to a track
To stop scanning, press the MENU but- ton :.
The currently scanned track will then con- tinue to be played normally.
Fast searching (audible)
To fast search backwards or forwards,
press and hold down one of the 
buttons 6 until fast searching back- wards / forwards begins.
Repeating tracks (REPEAT)
If you want to repeat a track,
press the 4 RPT button <.
"RPT TRCK" appears briefly on the display and the RPT symbol is displayed. The track is repeated continuously until you deacti- vate RPT.
44