CD MODE
Displaying CD text
Some CDs include CD text. The CD text might contain the names of the artist, album and track.
You can allow the CD text to be dis- played as scrolling text every time you switch to another track. The default dis- play will appear again after the whole CD text has been shown once. For fur- ther details, please read the section entitled “Configuring the display”.
Switching CD text on/off
➮Press the MENU button 7.
➮Press the 
or 
button 6 repeat- edly until “CD TEXT” appears in the display.
➮Switch the CD text function on
(“TEXT ON”) or off (“TEXT OFF”) using the 
or 
button 6.
When you have finished adjusting the setting,
➮press the MENU button 7 twice.
Traffic announcements in CD mode
If you wish to receive traffic announce- ments whilst CD mode is activated,
➮press the TRAF¥RDS button 8.
Traffic announcement priority is active when the traffic jam symbol is shown in the display. For further details, please read the “Traffic information reception” chapter.
Ejecting a CD
➮Press the 
button 2. The control panel opens.
➮Press the 
button < next to the CD compartment.
The CD is ejected.
➮Remove the CD.
➮Gently close the control panel whilst exerting a little pressure until you feel it click into place.
Notes:
●If a CD is ejected, the drive will au- tomatically draw it back in again af- ter approx. 10 seconds.
●You can also eject CDs whilst the device is switched off or whilst an- other audio source is activated.
52