Blaupunkt MP36 operating instructions Selecting the waveband / memory bank, Tuning into a station

RADIO MODE

The RDS function is active when an RDS symbol lights up in the display.

Switching REGIONAL on/off

➮Press the MENU button 8.

➮Press the or button 7 re- peatedly until “REG” appears in the display. “OFF” or “ON” is dis- played alongside “REG”.

➮To switch REGIONAL on/off, press the or button 7.

➮Press the MENU button 8.

Selecting the waveband / memory bank

This device can be used to receive sta- tions in the FM frequency band. Three memory banks (FM1, FM2, and FMT) are available for the FM waveband.

Six stations can be stored in each memory bank.

To switch between the memory banks FM1, FM2, and FMT,

➮briefly press the BND•TS button

;.

Tuning into a station

There are various ways of tuning into a station.

Automatic station seek tuning

➮Press the or button 7.

The radio tunes into the next receiva- ble station.

Tuning into stations manually

You can also tune into stations manu- ally.

Note:

●You can only tune into stations manually if the RDS function is deactivated.

➮Press the or button 7.

Browsing through broadcasting networks (only FM)

If radio stations provide several pro- grammes, you have the option of browsing through their “broadcasting networks”.

Note:

●The RDS function must be activat- ed before you can use this fea- ture.

➮Press the or button 7 to switch to the next station on the broadcasting network.

Note:

●When using this feature, you will only be able to switch to stations that you have received once be- fore already. To receive the sta- tions, use the scan function or the Travelstore function.

Setting the sensitivity of station seek tuning

You can choose whether the radio should only tune into stations provid- ing good reception or whether it can also tune into those with a weak re- ception.

36