Blaupunkt MP71 Optimising radio reception, Programme type is now stored in the selected location

Page 16

RADIO OPERATION

PTY-EON

If you specify the programme type and start seek tuning, the unit will switch from the cur- rent station to a station of the selected pro- gramme type.

Note:

●If no station is found that corresponds to the selected programme type, you will hear a beep sound and “NO PTY” ap- pears briefly in the display. The radio will then retune to the station that was received last.

●If the tuned radio station or another sta- tion on the broadcasting network broad- casts the required programme type at a later point in time, the radio automatical- ly switches from the currently tuned sta- tion or from CD mode / CD changer mode to the station whose programme type matches the one you selected.

Switching PTY on/off

To use the PTY function,

➮press the TUNE button >in radio mode.

The radio functions menu appears in the dis- play.

➮Press the softkey 4that corresponds to the “PTY” display item.

When PTY is activated, the display briefly shows the programme type that was select- ed last. PTY appears in the display.

To return to the main radio menu,

➮press the TUNE button >or wait eight seconds.

The settings are saved.

Selecting a programme type and starting seek tuning

➮Press the or button 7.

The current programme type appears in the display.

If you want to select another programme type,

➮keep pressing one of the buttons 7 until the required programme type is displayed.

Or

To select a stored programme type,

➮press one of the softkeys 4 corre- sponding to the “ST1” – “ST6” display items.

The selected programme type is displayed briefly. To start seek tuning,

➮press the or button 7.

The next receivable station corresponding to your selected programme type will then be tuned into.

Storing a programme type on a station button

➮Select a programme type using the or

button 7.

To store a programme type,

➮press and hold (for longer than one sec- ond) one of the softkeys 4correspond- ing to the “ST1” – “ST6” display items.

The programme type is now stored in the selected location.

Optimising radio reception

Treble cut in the presence of interference (HICUT)

The HICUT function improves the sound when radio reception is poor. When interfer- ence is being received, the treble is automat- ically cut which also reduces the level of in- terference.

Setting HICUT

➮Press the MENU button 8.

➮Press the or button 7until “HI- CUT” appears in the display.

➮Press the or buttons 7 to adjust the HICUT function.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Los Angeles MP71 Open here 14 13 Operating Elements Contents Accessories Road safetyFitting KeyCard Theft Protection Theft ProtectionInserting the KeyCard Removing the KeyCardTraining a new KeyCard Entering the master code KeyCard lost or damagedVisual theft protection LED Switching on and off Theft Protection Switching on and OFFAdjusting the volume VolumeTone and volume Tone and VolumeAdjusting the display Adjusting the viewing angleAdjusting the display brightness DisplaySwitching to Radio Mode Radio OperationRDS Function Tuner AlternativeRadio Operation Scanning through stations Setting sample duration ScantimeProgramme type PTY Optimising radio reception Programme type is now stored in the selected locationSetting the tuner Switching between stereo and monoChanging information displayed CD operation CD OperationStarting CD operation and inserting the CD Removing the CDChanging the display contents Fast searching audibleRandom Track Replay MIX Scanning tracks ScanMP3 Mode MP3 modePreparing the MP3 CD Switching to MP3 mode Selecting a directorySelecting tracks Random track play MIXSetting scrolling text Setting the displayRepeating individual tracks or whole directories Repeat CD changer operation OptionalMP3 Modecd Changer Operation Starting CD changer operationCD Changer Operation Repeat play of individual tracks or whole CDs RepeatPlaying tracks in random sequence MIX Sampling all tracks on all CDs ScanSetting the time Clock TimeCD Changer Operation Time Clock time can be automatically set bySelecting 12/24-hour clock mode Adjustment instructionsSwitching the equalizer on and off EqualizerAdjusting the equalizer Adjusting the sharpness of the filterSelecting the tone preset Level meter / SpectrometerEqualizer adjustment guide Tone impression/problem ActionSwitching the AUX input on and off Switch-on delay for external preExternal audio sources External Audio SourcesGuarantee Technical dataTechnical Data Blaupunkt GmbH
Top Page Image Contents