Blaupunkt RD 169 Selecting a waveband, Station tuning, Switching between the memory, Banks FM

Tune into a station with the rocker switch (either automatically or manual- ly).

Selecting a waveband

The following wavebands are available:

UKW (FM)	87,5	- 108 MHz,
MW	531	- 1602 kHz and
LW	153	- 279 kHz

Press the “BA/TS”button to select the desi- red waveband.

Station tuning

Automatic seek tuning /

•Press /; the car radio will automati- cally search for the next station.

If you hold / pressed up or down on the rocker switch, seek tuning will speed up in the corresponding direction.

Automatic seek tuning

Up

Down

<</>> Up/down in short intervals

(on FM only if “AF” is switched off)

Manual tuning with << >>

You can also tune into a station manually.

Important: AF and PTY must be switched	• Press “BA/TS”for 2 seconds; the sy-
off (i.e. the symbols do not light up in the	stem will start to run through the fre-
display).	quency band.
If necessary, deactivate these function by	If “AF” is not lit up,
pressing “AF.TA” or “PTY”.	• Press “AF.TA” until you hear a beep.
Manual tuning:	It is now possible to select stations using
	<< >>.
• Press << >>; the frequency will change
in short intervals in the corresponding	Switching between the memory
direction.	banks (FM)
If you hold << >> pressed to the left or the	You can switch between the memory banks
right on the rocker switch, the frequency
scan will speed up.	I, II and T in order to store stations and re-
	call them later.
Scrolling through the broadcast	The currently selected memory bank will
networks (FM only)	appear in the display.
You can use the << >> buttons to tune into	• Press the “BA/TS”button as many
	times as necessary until the desired
stations in your reception area.
	memory bank lights up in the display.
If it is possible to receive several program-
mes in the same broadcast network, you can	Storing stations
scroll through them in the forwards direc-
tion by pressing >>, or backwards using the	On FM, you can store six stations on the
<< button, e.g. NDR 1, 2, 3, 4, N-JOY, ...	preset buttons 1 - 6 for each of the memory
For this to work properly you must have al-	banks (I, II, T).
ready tuned into the stations at least once	On MW/LW, you can also store six stations
and “AF” must be active (lights up in the dis- each.
play).	• Select the appropriate waveband by
To do this, you can start the Travelstore seek	pressing BA/TS.
operation:	•

32