Blaupunkt RD 169 DSC programming, Deactivating the hour correction, Function

	DSC programming
Deactivating the hour correction	The car radio has been equipped with DSC
function	(Direct Software Control) to allow you to cu-
In the DSC menu it is possible to switch off	stomise certain programmable, basic set-
	tings to suit your personal needs and prefe-
the hour correction function with “CLK MAN/ rences and then store them.
CLK AUTO”. An automatic correction for mi-	The basic settings for this audio equipment
nutes will continue to take place.
	were made at the factory.
This is useful if you would like to display the
	In the following you can find an overview of
time for a different time zone, for example.
	these settings, so that you can always reset
If necessary,
	to them if desired.
• Press “DSC” briefly and / as often as	If you wish to alter any of the programming,

required until “CLK MAN/CLK AUTO” ap- • press “DSC”.

pears in the display. Use the rocker switch to select and set the

•To deactivate the hour correction functions you wish to change. The display function press <</>> to select “CLK MAN”. will show you the setting you have selec-

• Press <</>> to set the hours/minutes.	ted.
	Press / to select the function.
	Press << />> on the rocker switch to chan-
	ge or recall the values.
	Note:
	Whether the settings listed in the following
	are available or not depends on the car au-
	dio system model and the features with
	which it is equipped.
	If you cannot select any of the functions li-
	sted here, then your car audio system is not
	equipped with that feature and it cannot be
	adjusted as a result (also see the section
	on “Equipment features list”).

AM ON/OFF It is possible to block out one or both of the AM wave- bands (MW/LW).

This means you will select only the wavebands you want when you press “BA/ TS”:

AM ON - all wavebands are available

MW OFF - LW, FM only

LW OFF - MW, FM only

AM OFF - FM only

BEEP Acknowledgement tone for all functions which require a button to be pressed for more than one second.

The volume can be adjusted from between 0 to 9. (0 = off)

CLOCKSET Sets the clock manually. Refer to the section on “Clock”.

CLK. MAN. Switches off hour correction function.

Read the information in the section on “Clock “.

CLK. AUTO Automatic hour correction using the RDS/CT signal. Refer to the section on “Clock”.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

39