Blaupunkt RDM 169 operating instructions First-time installation

Page 17
Closing the Install menu

the master code for the unit, which you will find in the radio pass.

Always keep the radio pass in a safe place. Do not leave it in your vehicle.

Training the new KeyCard

• Insert the new KeyCard into the unit

and lock the operating panel into posi-

tion.

 

• Switch the unit off.

• Press TU and ST1 at the same time

and switch the unit on. “0000” will ap-

pear in the display.

• Now use the rocker switch to enter the

four-digit master code from the radio

pass:

 

/

- Enter digits

 

(press as often as required)

<< >> - Select the entry position.

First-time installation

After you switch on the unit for the first time

If this signal is not available, the audio sys-

or when the unit has been disconnected from

tem will attempt to receive the DCF-77 time

the power supply, “INSTALL” will appear in

signal (atomic clock) to correct the time the

the top line of the display.

next time it is switched off. The display will

In this menu you can enter/alter the follow-

indicate “CLK Sync” while it is synchronis-

ing the time.

ing:

If you would like to set the clock manually,

Time, owner ID, reset to default settings,

ignition connection on/off, internal output

• press CLK, the field to be adjusted will

stage on/off.

flash in the top line of the display

 

(hours or minutes)

Activating the Install menu

• Press << / >> to switch fields if neces-

You can activate the Install menu at any

sary and use / to enter the correct

time.

time.

Once you have completed the setting,

• Just hold DSC pressed down for 4 sec.

• press ENT, the INSTALL menu will re-

 

 

turn to the display.

 

For more information on the clock, please

 

refer to the section on the “Clock - Time”.

 

Entering your Owner Identifica-

 

tion

• Press ENT after you have entered the

correct master code.

The new KeyCard has been accepted when the unit will begin to play.

•Press EXIT.

Setting the clock

The clock is set automatically when the ra- dio is tuned into an RDS station which has the CT function (clock time).

Use this function to enter six lines with eight characters each as your proof of ownership.

To do so

•press O-ID, the first entry position will flash in the top line of the display.

Use / to select the letters, digits and sym- bols, use << / >> to select the entry posi- tion.

62

Page 16 Page 18
Image 17
Page 16 Page 18
Contents San Francisco RDM Page Contents Contents Quick Reference Next AM MW, LW Quick ReferenceNext FM Switch to Menu level Adjusting the radio functionsPRE ExitREG Regional PTYRT Radio text MonoName CLRDIS AUDDOT field Display= CDC ? TU tunerKeyCard theft protection system Visual theft protectionInserting the KeyCard EjectRadio operation Station seek tuning up RC 08 remote control unitSRC Source Select track up Press briefly CUE fast forward audibleImportant notes Operating the unit for the first time KeyCard theft protection systemRemoving the KeyCard Training a second KeyCard / Replacing a KeyCardKeyCard theft protection system First-time installation Reset to default settings First-time installationSwitching the ignition connec- tion on/off Closing the Install menuSelecting the operating Optimising the viewing Mode Angle AF Alternative frequency Switching between the menu levelsRadio operation with RDS Radio Data System Radio operation with RDS Radio Data System Station tuningREG regional program Selecting a wavebandScrolling through the broadcast- ing networks FM only Manual tuning withChanging the memory bank FM Storing stationsRecalling stored stations Scanning stored stations with Preset ScanAutomatically storing Strongest stations with Travel StoreSelecting the seek tuning sensi Automatic bandwidth adjust Switching from stereo to monoChanging the scan time Scan TivityNews Program typeSelecting and storing PTY program types Selecting stored program typesRadio text PTY seek tuningStoring program types Activating radio textSwitching the warning beep off Switching radio text offTraffic information station reception with RDS-EON Traffic announcement prioritySwitching on CD operation Automatic seek tuning startCD operation / CD changer operation Removing a CDSelecting the display mode Switching on CD changer operationCD operation / CD changer operation Selecting tracksRepeating tracks/CDs Switching TPM playback on/offStoring tracks with TPM Deleting the TPMDeleting CD names/TPM at the same time Entering CD namesClock Time Clock display when the audio system is switched offDisplaying the clock AutomaticallyActivating the equalizer settings Selecting a 12 or 24-hour modeSynchronisation An overview of the equalizer functionsSelf-adjusting equalizer Switching the equalizer on/offHi-fi self-adjustment Starting the hi-fi self-adjustmentAltering the setting manually Manual equalizer adjustmentActivating an equalizer setting Adjusting DNC sensitivity Adjusting DNCSwitching DNC on/off Safety informationTUN Tuner DSC programmingVAR Various DSC programmingTOM ReadScan Scantime SET CLK ClockSync ModeCDC Changer Overview of the DSC default settingsAmplifier Specifications Glossary Technical TerminologyTuner CD playerGlossary Technical Terminology Preset ScanREG Softkey Software keyTPM IndexRDS-EON Blaupunkt-Werke GmbH
Related manuals
Manual 30 pages 14.63 Kb Manual 30 pages 11.18 Kb Manual 48 pages 63.2 Kb

RDM 169 specifications

Blaupunkt RDM 169 is a sophisticated car stereo system designed to deliver exceptional audio quality while providing a range of modern features to enhance your driving experience. Known for its reliable performance, this model has become a favored choice among car audio enthusiasts.

One of the standout features of the Blaupunkt RDM 169 is its support for MP3 and WMA playback. This versatility allows users to enjoy their favorite music in various formats, making it easy to access a vast library of tracks. With a built-in CD player, the device provides the classic option of listening to physical media, ensuring that your entertainment needs are met whether you’re using CDs, USB drives, or digital files.

The device features a sleek design with an easy-to-read display, providing essential information such as track titles and radio station frequencies at a glance. The user interface is intuitive, allowing for seamless navigation through playlists and radio stations. Additionally, the ergonomic buttons enhance usability, enabling drivers to adjust settings without distraction.

The Blaupunkt RDM 169 boasts a powerful built-in amplifier, delivering a robust output that enhances audio clarity and depth. With adjustable equalizer settings, users can customize their sound preferences to create an audio experience tailored to their liking. The system also includes preamp outputs, allowing for the easy addition of external amplifiers or subwoofers, further elevating the sound quality.

In terms of connectivity, the RDM 169 features a front USB port, accommodating a range of devices, including flash drives and smartphones. This ensures convenient access to your playlist without the hassle of tangled cords. Moreover, the auxiliary input allows for direct connections with various portable media devices.

For radio enthusiasts, the RDM 169 offers AM/FM capabilities with a built-in RDS tuner, providing access to a plethora of radio stations while displaying additional information such as song titles or artist names. The advanced tuning technology ensures reliable reception, even in areas with poor signal strength.

The Blaupunkt RDM 169 is compatible with steering wheel controls, offering greater convenience and safety as drivers can manage their audio settings without taking their hands off the wheel.

Overall, the Blaupunkt RDM 169 stands out in the automotive audio market due to its combination of remarkable sound quality, user-friendly design, and an array of modern features. Whether you’re a casual listener or a serious audiophile, this car stereo system is engineered to enhance your driving experience with exceptional entertainment and ease of use.
Top Page Image Contents