Blaupunkt ACD 9430 operating instructions CD Section

Page 9

Now press the ARI button 4. The ARI indication lights up on display 9 c.

Then tune in to one of the traffic stati- ons of your area.

Switch over to CD operation by either

inserting a disk, or - if a CD is already inserted by

pressing the SRC button 6.

CD reproduction will be interrupted as soon as a traffic message is “put through”.

CD Section

Inserting the Disk

With this set you can play the normal stan- dard CDs without having to use an adapter:

Switch the set on.

Insert the CD (label side up) without applying force.

The disk is automatically pulled into the unit to reach the playing position. Once it has been fed in, reproduction starts.

Review (Fast backward):

Keep depressed the left side of the rocker switch </> 7 for more than than 1 second.

Mix Function

Press the Mix button 5to listen to the titles in an arbitrary order.

When Mix is on, the “Mix” indication lights up on display 9 j.

When leaving the coverage area of the tuned in traffic station, your car stereo will automa- tically start searching for a new one.

If no ARI station is found after having scan- ned the frequency band several times, the system sends out an alarm tone.

In this case switch off the ARI function by

pressing button 4. The alarm tone stops.

Automatic Start of the Station Seek Operation (CD play)

Your set will also automatically start seeking for a new traffic station when leaving the coverage area of the tuned in traffic program-

Ejecting the Disk

To eject the disk, keep the • SRC button 6 depressed at least 2 sec.

Never block or support the CD mechanism in any way, since this would damage the set.

Title Selection/Cueing and Re- viewing

After the CD has been inserted into the set, „Cd“ lights up on display9. The display indication 9 i changes to “T1” (Track 1) after approx. 5 seconds. You can skip or repeat titles by using the </> buttons 7.

Changing the Audio Source with

SRC

You can shift between the connected audio sources in the order CD Radio CD. To switch over to another audio source during CD operation,

press the SRC button 6.

The set changes to radio operation.

me while listening to a disk. An alarm tone is sent out during the search operation.

Cue (Fast forward):

Keep depressed the right side of the rocker switch </> 7 for more than than 2 second.

18

Image 9
Contents ACD Radio a b c d Front Panel Description Important information ContentsInstallation/connection Anti-theft codingWrong code number entered Switching the code system off Power supplyAmplifier Section Restart following interruptionRadio Section Automatically Storing the Stron- gest Stations Memorizing a StationActivating a Stored Station Traffic Messages ARICD Section What to Do If Your Car Stereo Needs Service? Technical DataAdjusting the seek tuning sensitivity Programming with DSC Appendix