Blaupunkt ACR 3250 Selecting the seek tuning sensi- tivity, Switching from stereo to mono FM

When holding the or button down, the frequency scan is speeded up.

Selecting the seek tuning sensi- tivity

You can alter the automatic seek tuning sensitivity.

For this,

•press the lo·m button briefly.

If “lo” is displayed, the radio will only pick up strong, local stations (low sensitivity).

If “lo” does not light up, the radio will also pick up weaker, distant stations (high sensitivity). Make sure that “m” is not indicated in the display.

Switching from stereo to mono (FM)

If reception is poor, you may get better sound quality by switching to mono:

•Press the lo·m button until a beep sound is released and the stereo sign disappears from the display.

Each time the radio is switched on, stereo playback is activated ( is displayed).

The unit will automatically switch to mono if the received signal is not strong enough for stereo playback.

Changing the memory bank

You can shift between the memory banks I,

IIand T in order to store stations and recall them later.

The currently selected memory bank is indi- cated in the display.

•Toggle the FM button until the desired memory bank lights up in the display.

Storing stations

On FM, you can store six stations on the preset buttons 1-6for each of the memory banks I, II and T.

•Select the memory bank with the FM button.

•Select the desired preset button (1 to 6) for the new station to be stored using preset buttons 1-6.

•Tune into a station either automatically or manually by pressing or .

•Press the desired preset button 1-6until the radio resumes play after the muting and you hear the beep.

Now the station has been stored.

The activated preset button 1-6 is indicated in the display.

Automatically storing the