Selecting the seek tuning sensi- tivity

When keeping the or the button de- pressed, seek tuning will speed up in up- wards or downwards direction.

Manual tuning

Prerequisite: “m” lights up in the display. Toggle the lo·m button until “m” is displayed.

•Press ; the frequency will change in short intervals in upwards or down- wards direction.

When holding the or button down, the frequency scan is speeded up.

Selecting the seek tuning sensi- tivity

You can alter the automatic seek tuning sensitivity.

For this,

•press the lo·m button briefly.

If “lo” is displayed, the radio will only pick up strong, local stations (low sensitivity).

If “lo” does not light up, the radio will also pick up weaker, distant stations (high sensitivity). Make sure that “m” is not indicated in the display.

Switching from stereo to mono (FM)

If reception is poor, you may get better sound quality by switching to mono:

•Press the lo·m button until a beep sound is released and the stereo sign disappears from the display.

Each time the radio is switched on, stereo playback is activated ( is displayed).

The unit will automatically switch to mono if the received signal is not strong enough for stereo playback.

Changing the memory bank

You can shift between the memory banks I, II and T in order to store stations and recall them later.

The currently selected memory bank is indi- cated in the display.

•Toggle the FM·T button until the desi- red memory bank lights up in the dis- play.

Storing stations

On FM, you can store six stations on the preset buttons 1 to 6 for each of the memory banks I, II and T. On MW/LW it is possible to store six stations on each waveband.

•Select the waveband with the FM·T or M·L button and for FM select the mem- ory bank with FM·T.

Toggle FM·T until the desired memory bank is indicated in the display.

•Select the desired preset button (1 to 6) for the new station to be stored using preset buttons 1-6.

•Tune in a station either automatically or manually by pressing < or >.

•Press the desired preset button (1-6) until the radio resumes play after the muting and you hear the beep.

Now the station has been stored.

The activated preset button (1-6) is indicated in the display.

Note:

If you select an already stored station, the corresponding memory bank and preset but- ton will flash in the display for about 6 seconds.

Automatically storing the strongest stations with Travel- store

You can automatically store the six most powerful FM stations of your current recep- tion area sorted according to their signal strength.

ENGLISH DEUTSCH

FRAN AISÇ

ITALIANO NEDERLANDS SVENSKA

ESPA OLÑ

PORTUGU SÊ