Blaupunkt ACM 5450 operating instructions Appendix, Mechanism/cassette tapes, Specifications

Appendix

Mechanism/cassette tapes

To avoid possible problems, you should not use cassette tapes longer than 60 or 90 minutes (C60/C90). Store your tapes in a cool place away from dirt, dust and tempera- tures exceeding 50 ° Celsius. Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport. After approximately 100 hours of use, dust partic- les collected on the playback head or roller may lead to tape run problems and sound distortions.

Use a head cleaning tape to remove normal dirt build-up. For tougher cases, use a cotton swab (Q-Tip) soaked with alcohol. Do not attempt to clean by inserting a hard object into the player!

Specifications

Amplifier
Output power:	4 x 6 W RMS power
	acc. to DIN 45324/3.1
	into 4 Ω
	or
	4 x 8 W max. power
	acc. to DIN 45324/3.2
FM waveband
Sensitivity:	1,3 ∝V at 26 dB
	signal-to-noise ratio
Frequency
response:	35 - 15 000 Hz
Tape player
Frequency
response:	40 - 14 000 Hz

Subject to modifications!

24