Scope of delivery Startup Radio mode
Scope of delivery
The scope of delivery includes:
•New York 800
•Remote control (incl. battery)
•TMC Tuner (for 1 011 103 800/802 only)
•MicroSD card with navigation data in the MicroSD card slot (only for devices with navigation)
•GPS antenna
•External Bluetooth microphone
•Getting started
•Support frame
•Small parts set
•Installation material
•Connecting cable
Placing the device in operation
Caution!
Transport securing screws
Ensure that the transport securing screws are removed before the startup of the device.
Switching on/off
Switching on/off with the rotary/pushbutton
For
For
Switching on/off via vehicle ignition
If the car sound system is connected with the vehicle ignition and it was switched off with the rotary/pushbut- ton 5, it is switched on or off with the ignition.
Volume
Adjusting the volume
You can adjust the volume in steps from 0 (off ) to 50 (maximum).
Turn the rotary/pushbutton 5 to change the vol- ume.
Muting the car sound system (Mute)
Briefly press the rotary/pushbutton 5 to mute the device or to reactivate the previous volume.
Main menu
In the main menu, you press the buttons on the touch- screen to call up the different sources and operating modes.
Press the MENU button 2. The main menu is displayed.
As long as you do not select a new audio source, the last active audio source is played back.
Note:
The figures used in these instructions are intended to facilitate the explanations and details may deviate from your device.
Radio mode
Start radio mode
In the main menu, press the Radio button. The radio menu is displayed.
Select memory bank
Different memory banks and wavebands are available. Up to 6 stations can be stored in each memory bank.
Press the [ 
] button repeatedly until the desired memory bank is displayed.
Tuning into a station
Tuning into stations manually
Briefly press the [
] or [ 
] button once or sev- eral times to change the frequency in increments.
6