
Bluetooth mode
Bluetooth mode
The Bluetooth® function allows registering cell phones and media playback devices with the New York 800.
When you register a cell phone with the New York 800, you can make phone calls with the
If a cell phone is registered via Bluetooth® and a call is re- ceived during the playback of another source, the source playback is interrupted and the call menu is displayed.
Starting Bluetooth mode
In the main menu, press on Bluetooth.
The Bluetooth® menu is displayed. It contains the list of known Bluetooth® devices. Other audio sources are switched off.
Registering Bluetooth devices
If you want to register a device with the New York 800 for the first time, proceed as follows:
Ensure that Bluetooth® is activated at the New York 800 and at your Bluetooth® device.
In the options menu of the Bluetooth® mode, enter a pairing code (see Bluetooth® settings).
Search for new devices/connections on your Blue- tooth® device.
The New York 800 appears as NY800 in the list of Bluetooth® devices.
Establish the connection; you may have to enter the pairing code that was previously defined on the New York 800.
The connection is being established and the menu for the registered device is displayed.
[ ] Change to next higher level.
[ ] Move selection mark.
[ ] Move selection mark.
[] Disconnect connection to marked device.
[ ] Delete marked device from the list.
[ ] Display options menu.
When the device is in range, the connection is estab- lished and the menu for the device is displayed.
Telephone mode - Bluetooth
If you registered a phone with the New York 800 via Blue- tooth®, the following menu appears.
[ ] Change to next higher level.
[ ] Move selection mark.
[ ] Move selection mark.
[] Disconnect connection with current device.
[ ] Display keypad to directly enter a phone number
[ ] Display options menu.
Select a contact/number via the call lists or the phone book and double the entry twice
The connection is being established.
16