Alpine iDA-305 owner manual 32-EN

Page 34

6 Repeat steps 3 to 5, and adjust each band level.

Frequency Adjustment (F0)

Band1 (63 Hz) / Band2 (150 Hz) / Band3 (400 Hz) / Band4 (1 kHz) / Band5 (2.5 kHz) / Band6 (6.3 kHz) / Band7 (17.5 kHz)

Level Adjustment (Gain)

Adjustable output level: -6 to +6 dB

•During adjustment, if you press in the outer ring and rotate the Double Action encoder to the left or right, the band changes, and you can adjust the adjacent band. If you press then rotate and hold the Double Action encoder to the left or right, the band continuously changes.

•The function is inoperable when Defeat is set to ON.

Adjusting the Time Correction

Sound Field Adjustment Time Correction

Before performing the following procedures, refer to “About Time Correction” (page 34).

1 Rotate the Double Action encoder to select “Time Correction” in the Sound Field adjustment mode, and then press /ENTER.

Depending on the X-OVER switch setting on the IMPRINT audio processor (PXA-H100), the speaker to be adjusted differs.

3WAY System

High L / High R / Mid L / Mid R / Low L / Low R

F/R/SUBW. System

Front L / Front R / Rear L / Rear R / Subw. L / Subw. R

2 Rotate the Double Action encoder to select the speaker, and press /ENTER.

Selected speakers

3 Rotate the Double Action encoder to set to the distance of each speaker.

0.0 cm~336.6 cm (0.0 inch~132.7 inch)

4 If /ENTER is pressed, the adjustment value is set, and the speaker selection mode is activated.

5 Repeat steps 2 to 4, and set the all speakers.

•During adjustment, if you press in the outer ring and rotate the Double Action encoder to the left or right, the speaker changes, and you can adjust the adjacent band. If you press then rotate and hold the Double Action encoder to the left or right, the speaker continuously changes.

You can also change the speaker by pressing BAND.

32-EN

Adjusting the Crossover Settings

Sound Field Adjustment X-Over

Before performing the following procedures, refer to “About the Crossover” (page 35).

1 Rotate the Double Action encoder to select “X-Over” in the Sound Field adjustment mode, and then press /ENTER.

2 Rotate the Double Action encoder to select the band, and then press /ENTER.

If a band is selected, each band screen to be adjusted is displayed.

3WAY System / Normal (L=R)

Setting items:

Low/Mid-Low/Mid-High/High

3WAY System / Individual (L/R)

Setting items:

Low L/Low R/Mid-Low L/Mid-Low R/Mid-High L/

Mid-High R/High L/High R

F/R/SUBW. System / Normal (L=R)

Setting items:

Subw./Rear/Front

F/R/SUBW. System / Individual (L/R)

Setting items:

Subw. L/Subw. R/Rear L/Rear R/Front L/Front R

•Depending on the current system, selectable band content differs. Refer to “Setting the Filter type” (page 31) and the setting of the X-OVER switch on the IMPRINT audio processor (PXA-H100).

3 Rotate the Double Action encoder to adjust the frequency/slope/level.

The currently adjusted item lights up.

Band

Cut-off

 

 

 

 

 

 

 

 

Level

frequency

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Slope

4 The adjustment content is selected by pressing

/ENTER, and operation shifts to a next adjustment item.

5 When the selected band settings are complete, press BAND.

The next band adjustment screen is displayed.

6 Set all bands by repeating steps 3 to 5.

Page 33 Page 35
Image 34
Page 33 Page 35
Contents IDA-X305 Page Contents Operating Instructions Display Setting PrecautionsOperating Instructions On Handling USB Memory Double Action Encoder Operation Setting the Time and Calendar Turning Power On and OffAdjusting Volume Getting StartedDisplaying the Calendar/Time How to View the DisplayRadio Press ViewTuning to Preset Stations Presetting Stations ManuallyPresetting Stations Automatically Receiving a Multicast Station HD Radio mode onlyAbout iPhone/iPod usable with this unit Changing the Display HD Radio mode onlyIPhone/iPod Selected program is received10-EN PlaybackSearching for a desired Song/Title To pause playback, pressSkip Function/Percent Skip Function/Alphabet Skip Function Search Position MemoryUp/Down Function 11-ENRepeat Play Random Play ShuffleRandom Play Shuffle All Changing the Display13-EN USB memory/ Portable audio player/ChangerChanger CD screen display example if no CD text exists Select the desired Folder Folder up/ down MP3/WMA/AAC Selecting a Disc Changer OptionalMulti-Changer Selection Optional 14-EN15-EN X. Random PlaySearching for CD Track Number CD changer only Press /ENTER during playFile/Folder Name Search Concerning MP3/WMA/AAC USB memory modeAbout MP3/WMA/AAC 16-ENTerminology 17-ENSetting the Bass Center Frequency Sound SettingSetting the Bass Control Setting the Bass BandwidthPress to return to normal mode Setting the Treble ControlAdjusting the High Pass Filter Turning Subwoofer ON/OFFSetting the Bluetooth Connection Bluetooth Bluetooth SettingPress and hold for 2 seconds to return to normal mode 20-ENGeneral Setting 21-ENDisplay Setting 22-ENAudio Setting IPhone/iPod SettingHD Radio Setting Only when HD Radio Tuner is connected 23-ENSAT Radio Receiver Optional 24-ENChecking the SAT Radio ID Number Storing Channel PresetsReceiving Channels with the SAT Radio Receiver Optional Receiving Stored ChannelsStoring the desired Song/Artist Sirius only Canceling the stored Alert Memory Sirius onlyGame Alert Setup Recalling the stored information Sirius onlyReceiving Weather or Traffic Information from SAT Radio Search FunctionSelect the desired Category Category up/down Instant Replay Function Sirius onlySetting the Auxiliary Data Field Display 28-ENImprint Operation Optional Changing MultEQ modeAdjusting Sound Setting in Manual Mode 29-ENSetting the Subwoofer System Setting the MX LevelEqualizer Presets Factory’s EQ Setting the Subwoofer PhaseSound Field Adjustment Setting the Filter typeSetting the Time Correction Unit 31-EN32-EN Storing and Recalling the Adjusted Contents 33-ENExample 2. Listening Position All Seats About Time CorrectionExample 1. Listening Position Front Left Seat 34-ENAbout the Crossover SUBW. Mode3WAY Mode 35-ENAbout Imprint 36-ENInformation Case of Difficulty38-EN Indication for CD Changer Indication for SAT Receiver Mode 39-ENSpecifications 40-ENInstallation and Connections 41-ENRemove mounting sleeve from the main unit see Removal on Installation42-EN Connections section43-EN Connections 44-EN45-EN Limited Warranty This Warranty does not cover the following

iDA-305 specifications

The Alpine iDA-305 is a cutting-edge car audio receiver designed to enhance your in-car entertainment experience. It embodies a sleek design, combining modern aesthetics with powerful technology, making it an ideal choice for avid music lovers and tech enthusiasts alike.

One of the standout features of the iDA-305 is its advanced digital media receiver abilities. Unlike traditional head units, the iDA-305 does not include a CD player, which allows for a compact design, reducing bulk while focusing on comprehensive connectivity options. Users can enjoy their favorite music through various sources, including USB, auxiliary input, and Bluetooth, making it compatible with numerous devices such as smartphones and tablets.

Bluetooth technology is one of the integral components of the iDA-305. It facilitates hands-free calling, allowing drivers to stay connected without losing focus on the road. Additionally, the dual Bluetooth feature enables simultaneous connections to two devices, allowing you to switch between your phone for calls and another for music seamlessly.

The iDA-305 supports high-resolution audio playback, ensuring that your listening experience is nothing short of exceptional. It is compatible with various audio formats, including MP3, AAC, and WMA, giving users the flexibility to enjoy their music in different file types without compromising quality.

The device boasts an intuitive user interface, featuring a vibrant display that can be adjusted for brightness based on ambient lighting, ensuring readability at all times. The responsive controls allow for easy navigation through your music library and settings, making it user-friendly, even while driving.

Sound customization is easily achievable with the Alpine iDA-305. It offers built-in equalizer settings, allowing users to tailor their audio experience according to their preferences. The digital time correction and crossover features enhance the sound quality, providing a more immersive listening experience.

Furthermore, the iDA-305 is designed to integrate seamlessly with various vehicles. Its compact design means it can fit into most dashboards without modification, ensuring a clean and factory-like appearance. The receiver is compatible with steering wheel controls, providing added convenience for users who want to manage their audio without taking their hands off the wheel.

Overall, the Alpine iDA-305 is a versatile and feature-rich car audio receiver. With its focus on digital media, advanced Bluetooth capabilities, intuitive controls, and customizable sound settings, it is tailored for those who demand quality and functionality in their in-car audio systems.
Top Page Image Contents